Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2013 >> CX-5 Touring, AWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Rear Center Seat Belt Removal/Installation >> Notes

Rear Center Seat Belt Removal/Installation: Notes

CAUTION:
  • The ELR (emergency locking retractor) has a spring that will unwind if the retractor cover is removed. The spring cannot be rewound by hand. If this occurs, the ELR will not work properly. Therefore, do not disassemble the retractor.
  1. Press the release switch, then disconnect the rear center seat belt and rear buckle.
  2. Remove the rear center seat belt with the rear seat back. (See REAR SEAT BACK REMOVAL/INSTALLATION ).
  3. Install in the reverse order of removal. (See REAR CENTER SEAT BELT INSTALLATION NOTE ).
    Fig 1: Identifying Rear Center Seat Belt, Buckle (LH) And Release Switch
    G09076255
scientia non olet · About Mike's Workshop Manuals