DTC C1031-35: Tire Pressure Monitoring System (TPMS) Set Switch: Notes

DTC C008964 DYNAMIC STABILITY CONTROL (DSC) DIAGNOSTIC PROCEDURE

DTC	C1031:35	Tire pressure monitoring system (TPMS) set switch
DETECTION CONDITION	Continuous ON signal from the TPMS set switch for 60 s or more is detected.
FAIL-SAFE FUNCTION	Tire pressure monitoring system warning light illuminates after flashes. Inhibits the TPMS control.
POSSIBLE CAUSE	The driver pressed and held the TPMS set switch for 60 s or more. TPMS set switch malfunction
SYSTEM WIRING DIAGRAM	-