Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2013 >> CX-5 Touring, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> On-Board Diagnostic [Front Body Control Module] >> DTC Inspection [Front Body Control Module (FBCM)] >> ODDTC Self Test >> Notes

ODDTC Self Test: Notes

  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    1. Select "Self Test".
    2. Select "Modules".
    3. Select "F_BCM".
  3. Verify the DTC according to the directions on the screen.
    • If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.
  4. After completion of repairs, clear all DTCs stored in the front body control module (FBCM). (See CLEARING DTC [FRONT BODY CONTROL MODULE (FBCM)] ).
scientia non olet · About Mike's Workshop Manuals