Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2013 >> 2 Touring, 1.5L Eng VIN Z, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System [MZR 1.5] >> Clutch Pedal Position (CPP) Switch Inspection

Clutch Pedal Position (CPP) Switch Inspection

  1. Verify that the CPP switch is installed properly.
  2. Disconnect the negative battery cable.
  3. Disconnect the CPP switch connector. (See CLUTCH PEDAL REMOVAL/INSTALLATION ).
  4. Inspect for continuity between the CPP switch terminals using an ohmmeter.
    CONTINUITY REFERENCE

    Measured condition Clutch pedal position Continuity
    Rod pushed Clutch pedal released Continuity detected
    Except above Clutch pedal depressed No continuity
    Fig 1: Checking Continuity Between CPP Switch Terminals Using Ohmmeter
    G09130326
scientia non olet · About Mike's Workshop Manuals