Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2013 >> 2 Touring, 1.5L Eng VIN Z, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Lock System >> Door Lock Switch Removal/Installation

Door Lock Switch Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the console panel. (See REAR CONSOLE REMOVAL/INSTALLATION ).
  3. Remove the screws.
  4. Disconnect the door lock switch connector.
  5. Install in the reverse order of removal.
    Fig 1: Identifying Door Lock Switch Screw
    G09133369
scientia non olet · About Mike's Workshop Manuals