Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2013 >> 2 Touring, 1.5L Eng VIN Y, Standard Trans >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic [Engine Control System MZR 1.5] >> DTC P0610:00: PCM vehicle configuration error >> Notes

DTC P0610:00: PCM vehicle configuration error: Notes

DTC DETECTION CONDITION & POSSIBLE CAUSES

DTC P0610:00  PCM vehicle configuration error 
DETECTION CONDITION 
  • The PCM data configuration error.

Diagnostic support note 
  • This is a continuous monitor (CCM).
  • The MIL illuminates if the PCM detects the above malfunction condition during the first drive cycle.
  • FREEZE FRAME DATA (Mode 2)/Snapshot data is available.
  • The DTC is stored in the PCM memory.
POSSIBLE CAUSE 
  • Configuration procedure has not been completed
  • PCM malfunction
scientia non olet · About Mike's Workshop Manuals