Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2012 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (EGR Function Testing - MAZDA) >> EGR Function Testing - MAZDA >> Test 4 >> EGR Valve

EGR Valve

WARNING: This page is about a different variant/trim than selected.

Warm engine to normal operating temperature and operate at idle. Disconnect and plug vacuum hose at EGR control valve. Connect vacuum pump to EGR control valve, and apply 1.5-3.5 in. Hg vacuum. Engine should run rough or stall. If engine does not operate as specified, clean or replace EGR control valve.

scientia non olet · About Mike's Workshop Manuals