Dust Cover Assembly Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Mark the new dust cover in the same way as the removed one.
Align the marks of the new dust cover and the knuckle.

Fig 1: Aligning Marks Of New Dust Cover And Knuckle
Courtesy of MAZDA MOTORS CORP.
Install the new dust cover using the SSTs.
Substitution SST
- 49 G033 107A
  Inner diameter: 98-101 mm {3.86-3.97 in}
  
  Plate thickness: 1 mm {0.04 in} or more
  
  Depth: 18 mm {0.71 in} or more
- 49 G026 103
  Outer diameter: 78-83 mm {3.1-3.2 in}
  
  Fig 2: Installing Dust Cover Using SST
  Courtesy of MAZDA MOTORS CORP.