Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2012 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 600 (Power Steering System) >> Steering Wheel And Column Removal/Installation [Without Advanced Keyless Entry And Push Button Start System] >> Steering Lock Mounting Bolt, Steering Lock Component Removal Note

Steering Lock Mounting Bolt, Steering Lock Component Removal Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Make a groove in the heads of the steering lock mounting bolts using a chisel and hammer.
  2. Remove the bolt using a flathead screwdriver, then remove the steering lock component from the steering shaft.
    Fig 1: Using Hammer And Screwdriver To Remove Steering Lock Component From Steering Shaft
    G06200206Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals