Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2012 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 600 (Power Steering System) >> Steering Wheel And Column Removal/Installation [Without Advanced Keyless Entry And Push Button Start System] >> Steering Lock Component, Steering Lock Mounting Bolt Installation Note

Steering Lock Component, Steering Lock Mounting Bolt Installation Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble section A of the steering lock component to the section B of the steering shaft.
  2. Temporarily install the steering lock component to the steering shaft using a new steering lock mounting bolt.
    Fig 1: Identifying Assemble Section Position Of Steering Lock Component
    G06200209Courtesy of MAZDA MOTORS CORP.
  3. Tighten the steering lock mounting bolt until the head breaks off.
    Fig 2: Tightening Steering Lock Mounting Bolt Using Torque Wrench
    G06200210Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals