Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2012 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 600 (Power Steering System) >> Steering Wheel And Column Removal/Installation [With Advanced Keyless Entry And Push Button Start System] >> Steering Lock Component, Steering Lock Mounting Bolt Installation Note

Steering Lock Component, Steering Lock Mounting Bolt Installation Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble section A of the steering lock component to the section B of the steering shaft.
    Fig 1: Identifying Assemble Section Position Of Steering Lock Component
    G06200220Courtesy of MAZDA MOTORS CORP.
  2. Set the set cover to the steering shaft and then temporarily install the steering lock component to the steering shaft using a new steering lock mounting bolt.
    Fig 2: Attaching Set Cover To Steering Shaft
    G06200221Courtesy of MAZDA MOTORS CORP.
  3. Tighten the steering lock mounting bolt until the head breaks off.
    Fig 3: Tightening Steering Lock Mounting Bolt
    G06200222Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals