Neutral Switch Removal/Installation [G66M-R]
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable.
- Remove the battery and battery tray. See BATTERY REMOVAL/INSTALLATION [L5] .
- Remove the aerodynamic under cover No. 2. See AERODYNAMIC UNDER COVER NO. 2 REMOVAL/INSTALLATION .
- Drain the oil from the transaxle
- Remove the neutral switch
- Install the neutral switch (with a new packing) to the transaxle case.
Tightening torque
20-29 N.m {2.0-2.9 kgf.m, 15-21 ft.lbf}
- Install the battery and battery tray. See BATTERY REMOVAL/INSTALLATION [L5] .
- Add the specified amount and type of oil. See TRANSAXLE OIL REPLACEMENT [G66M-R] .
- Install the aerodynamic under cover No 2. See AERODYNAMIC UNDER COVER NO. 2 REMOVAL/INSTALLATION .