Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2012 >> 6 s Touring Plus >> Repair and Diagnosis >> Brakes >> Traction Control >> On-Board Diagnostic [Abs And Dynamic Stability Control System] >> DTC C1137:64 [Dynamic Stability Control (DSC)] >> Notes

DTC C1137:64 [Dynamic Stability Control (DSC)]: Notes

DTC 1137:64  Reverse signal (MTX)
DETECTION CONDITION 
  • Detect the reverse signal for 10 s or more  under the following condition:
    • Vehicle speed: 60 km/h {37 mph} or more 
POSSIBLE CAUSE 
  • BCM malfunction
  • Connector or terminal malfunction
  • Back-up light switch malfunction
  • Short to power supply in wiring harness between back-up light switch terminal B and BCM terminal 2H
  • DSC HU/CM malfunction
G08141144