Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2012 >> 6 i Touring Plus >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle [Shift Mechanism] >> Automatic Transaxle Shift Mechanism Removal/Installation >> Selector Cable Adjustment

Selector Cable Adjustment

  1. Remove the negative battery cable.
  2. Remove the rear console. (See REAR CONSOLE REMOVAL/INSTALLATION .)
  3. Shift the selector lever to the P position.
  4. Unlock the lock piece of the selector cable (selector lever side) in the order as shown in the figure.
    Fig 1: Identifying Lock Piece And Safety Lock
    G08143333
  5. Verify that the manual shaft is in the P position.
    Fig 2: Identifying Manual Shaft In P Position
    G08143334
  6. Lock the lock piece and safety lock of the selector cable (selector lever side) in the order as shown in the figure.
    Fig 3: Identifying Lock Piece And Safety Lock
    G08143335
scientia non olet · About Mike's Workshop Manuals