Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2012 >> 3 Mazdaspeed, 2.3L Eng VIN 4 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> On-Board Diagnostic [Advanced Keyless Entry System And Push Button Start System] >> Clearing DTC

Clearing DTC

  1. Connect the M-MDS (IDS) to the DLC-2.
    Fig 1: Identifying DLC-2 Location
    G08163898
  2. After the vehicle is identified, select the following items from the initialization screen of the IDS.
    • Select "Self Test".
    • Select "Modules".
    • Select "RKE".
  3. Verify the DTC according to the directions on the screen.
  4. Press the clear button on the DTC screen to clear the DTC.
  5. Switch the ignition to off.
  6. Switch the ignition to ON and wait for 5 s or more  .
  7. Perform the DTC inspection. (See DTC INSPECTION [ADVANCED KEYLESS ENTRY SYSTEM AND PUSH BUTTON START SYSTEM] .)
  8. Verify that no DTCs are displayed.
scientia non olet · About Mike's Workshop Manuals