Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2011 >> Tribute i Touring, FWD >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Steering Gear Boot Removal/Installation

Steering Gear Boot Removal/Installation

  1. Remove the outer tie-rod end. See TIE ROD END - OUTER REMOVAL/INSTALLATION  .
  2. Remove the tie-rod end Jam nut.
  3. Remove and discard the 2 steering gear boot clamps and the steering gear boot.
  4. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals