Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2011 >> RX-8 R3, 1.3 2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 593 (Lighting System) >> Map Light Removal/Installation >> Map Light Removal Note

Map Light Removal Note

WARNING: This page is about a different car, the 2010 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert a tape-wrapped flathead screwdriver into the gap between the headliner and the map light.
  2. Press the tab, and remove the map light.
Fig 1: Removing Map Light
G05986231Courtesy of MAZDA MOTORS CORP.