Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2011 >> RX-8 R3, 1.3 2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 593 (Lighting System) >> Flasher Control Module Inspection >> Notes

Flasher Control Module Inspection: Notes

WARNING: This page is about a different car, the 2010 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the flasher control module with the connector still connected.
  2. Measure the voltage at each terminal.
    • If the voltage is not as specified in the Terminal Voltage Table (Reference), inspect the parts under "Inspection item(s)".
scientia non olet · About Mike's Workshop Manuals