Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2011 >> RX-8 R3, 1.3 2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 593 (Lighting System) >> Auto Light/Wiper Control Module Removal/Installation

Auto Light/Wiper Control Module Removal/Installation

WARNING: This page is about a different car, the 2010 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove in the order indicated in the table.
    Fig 1: Identifying Auto Light/Wiper Control Module Components
    G05986227Courtesy of MAZDA MOTORS CORP.
  3. Install in the reverse order of removal.
scientia non olet · About Mike's Workshop Manuals