DTC P0340: CMP Sensor (RH) Circuit: Notes

DTC P0340 CHART (MZI-3.7)

DTC P0340	CMP sensor (RH) circuit
DETECTION CONDITION	The test fails when the PCM can no longer detect the signal from the CMP sensor (RH).
POSSIBLE CAUSE	Connector or terminal malfunction Short to power supply between CMP sensor (RH) terminal A and PCM terminal 2X Short to ground circuit between CMP sensor (RH) terminal A and PCM terminal 2X Open circuit between CMP sensor (RH) terminal A and PCM terminal 2X Open circuit between CMP sensor (RH) terminal B and PCM terminal 2AB CMP sensor (RH) malfunction PCM malfunction
Courtesy of MAZDA MOTORS CORP.