Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2011 >> CX-9 Touring, 3.7 V, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System/Roll Stability Control System >> Rear Abs Wheel-Speed Sensor Inspection [AWD] >> Clearance Inspection

Clearance Inspection

  1. Verify the clearance between the ABS sensor rotor and the ABS wheel-speed sensor.
    • If there is any malfunction, check for improper installation, and replace if necessary.

    Clearance 

    • 0.95-1.75 mm {0.038-0.068 in} 
      Fig 1: Checking Clearance Between ABS Sensor Rotor And ABS Wheel-Speed Sensor
      G06727859Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals