Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2011 >> CX-7 s Touring, 2.3 L, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System >> DSC HU/Cm Removal/Installation >> DSC HU/CM Connector Removal Note

DSC HU/CM Connector Removal Note

  1. Pull the lock lever up in the direction of the arrow in the illustration.
  2. Pull the connector toward the vehicle rear and remove it.
    Fig 1: Pulling Lock Lever Up
    G06725263Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals