Fuel injection control
WARNING: This page is about a different variant/trim than selected.
PCM terminals
- Fuel Injection No. 1: 2BB(+)-body ground(-)
- Fuel Injection No. 2: 2BC(+)-body ground(-)
- Fuel Injection No. 3: 2BD(+)-body ground(-)
- Fuel Injection No. 4: 2AZ(+)-body ground(-)
Oscilloscope setting
- 10 V/DIV (Y), 25 ms/DIV (X), DC range
Vehicle condition
- Idle (after warm up)