Mike's Workshop Manuals
: Service manuals for every vehicle
Home
>>
Mazda
>>
2011
>>
6 s Touring Plus
>>
Repair and Diagnosis
>>
External Pages
>>
Different variant/trim
>>
Section 2 (Engine Control System [MZR 2.5])
>>
Pcm Inspection
>>
Inspection Using An Oscilloscope (Reference)
>>
CMP sensor signal
CMP sensor signal
WARNING:
This page is about a different variant/trim than selected.
PCM terminals
2S(+)-body ground(-)
Oscilloscope setting
1 V/DIV (Y), 25 ms/DIV (X), DC range
Vehicle condition
Idle (after warm up)
Fig 1: Display CMP Sensor Signal
Courtesy of MAZDA MOTORS CORP.
Courtesy of MAZDA MOTORS CORP.