DTC P1674:00: Notes
WARNING: This page is about a different variant/trim than selected.
DTC DETECTING CONDITION REFERENCE CHART
| DTC P1674:00 |
Control module software corrupted |
| DETECTION CONDITION |
- Indicates that an error occurred in the PCM. This DTC is set in combination with P2105:00.
Diagnostic support note
- This is a continuous monitor (CCM).
- The MIL illuminates if the PCM detects the above malfunction condition during the first drive cycle.
- FREEZE FRAME DATA (Mode 2)/Snapshot data is available.
- The DTC is stored in the PCM memory.
|
| POSSIBLE CAUSE |
- Software incompatibility issue
|