Security Light: 13, DTC: B10D7:94/P1260:00 [Immobilizer System (Advanced Keyless Entry And Push Button Start System)]: Notes
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- If the BCM configuration and DTC inspection for the following modules are performed, the keyless control module will be temporarily unable to read the key code due to the signal from the M-MDS. As a result, DTC B10D7:94 is stored in the keyless control module.
- KOEC/KOER self test (PCM)
- ABS (DSC HU/CM)
- BCM
- EPS (EPS control module)
- RCM (SAS control module)
- RKE (keyless control module)
- FFH (water heater unit)
DTC CHART
| DTC | Security light flashing pattern | 13 | Key ID number data cannot be read | |
|---|---|---|---|---|
| M-MDS display | Keyless control module | B10D7:94 | ||
| PCM | P1260:00 | |||
| POSSIBLE CAUSE |
EXAMPLES:
|
|||