Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 545 (Lighting System) >> Hazard Warning Switch Removal/Installation

Hazard Warning Switch Removal/Installation

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the center panel upper. (See CENTER PANEL UPPER REMOVAL/INSTALLATION .)
  3. Disconnect the hazard warning switch connector.
    4. Fig 1: Identifying Hazard Warning Switch & Hazard Warning Switch Connector
    G06201087Courtesy of MAZDA MOTORS CORP.
  4. Squeeze the tabs of hazard warning switch and pull it outward to remove it.
  5. Install in the reverse order of removal.
scientia non olet · About Mike's Workshop Manuals