Manual Transaxle Installation Note

WARNING:

Install the transaxle carefully, holding it steady. If the transaxle falls it could be damaged or cause injury.

Set the transaxle on a jack and lift into place.
Install the transaxle mounting bolts.
Adjust the SST (49 C017 5A0) so that the engine is located at the specified position.

Fig 1: Installing Transaxle Mounting Bolts
Courtesy of MAZDA MOTORS CORP.
Install the brake hose to the bracket as shown in the figure and install the clip.

Fig 2: Installing Brake Hose Clip
Courtesy of MAZDA MOTORS CORP.