Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System [LF, L5]) >> Throttle Position (TP) Sensor Inspection

Throttle Position (TP) Sensor Inspection

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • The inspection cannot be performed with this method correctly if there is a malfunction of the APP sensor or throttle valve actuator. Verify that no DTCs related to the APP sensor or throttle valve actuator are stored before the inspection.
  1. Connect the M-MDS to the DLC-2.
  2. Switch the ignition to ON.
  3. Verify that the TP sensor output voltage (M-MDS PID: TP1, TP2) is within the specification. (See PCM INSPECTION ).
scientia non olet · About Mike's Workshop Manuals