Auto-Dimming Mirror Inspection: Notes
WARNING: This page is about a different car, the 2011 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
- Measure the voltage at each terminal (other than terminal F.)
- If the voltage is not as specified in the Terminal Voltage Table (Reference) , inspect the parts under "Inspection item(s)" and related wiring harnesses.
- Disconnect the negative battery cable.
- Inspect the auto-dimming mirror connector for continuity at terminal F.
- If the system does not work properly even though the inspection items or related wiring harnesses do not have any malfunction, replace the auto-dimming mirror.