Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 638 (Dynamic Stability Control System) >> DSC HU/Cm Removal/Installation >> DSC HU/CM Connector Installation Note

DSC HU/CM Connector Installation Note

WARNING: This page is about a different car, the 2011 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. After connecting the connector, verify that the lock lever is completely pushed in.
Fig 1: Pushing Lock Lever
G05985206Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals