Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 638 (Dynamic Stability Control System) >> DSC HU/Cm Inspection >> Front Abs Wheel-Speed Sensor Removal/Installation

Front Abs Wheel-Speed Sensor Removal/Installation

WARNING: This page is about a different car, the 2011 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Slightly bend back the front mudguard. (See FRONT MUDGUARD REMOVAL/INSTALLATION .)
  2. Remove in the order indicated in the figure below.
  3. Install in the reverse order of removal.
Fig 1: Front ABS Wheel-Speed Sensor Components With Torque Specifications
G05985209Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals