Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 629 (Engine Control System) >> Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Removal/Installation >> MAF/IAT Sensor Installation Note

MAF/IAT Sensor Installation Note

WARNING: This page is about a different car, the 2011 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before installation of the MAF/IAT sensor, replace the O-ring.
Fig 1: Identifying O-Ring
G05981135Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals