Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 617 (Dynamic Stability Control) >> DSC HU/Cm Removal/Installation >> Brake Pipe Installation Note

Brake Pipe Installation Note

WARNING: This page is about a different car, the 2010 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the marks made before removal and install the brake pipe into the DSC HU/CM referring to the figure.
    Fig 1: Identifying Master Cylinder (Secondary Side And Primary Side)
    G06733268Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals