Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 571 (On-Board Diagnostic [Immobilizer System (Advanced Keyless Entry And Push Button Start System)]) >> Security Light: 22, DTC: B10DA:51/P1260:00 [Immobilizer System (Advanced Keyless Entry And Push Button Start System)] >> Notes

Security Light: 22, DTC: B10DA:51/P1260:00 [Immobilizer System (Advanced Keyless Entry And Push Button Start System)]: Notes

WARNING: This page is about a different car, the 2010 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
DTC: B10DA:51/P1260:00 (IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM) DETECTION CONDITION AND POSSIBLE CAUSE

DTC Security light flashing pattern 22 Communication error with PCM (Data transfer failure)
M-MDS display Keyless control module B10DA:51
PCM P1260:00
DETECTION CONDITION 
  • Communication error between keyless control module and PCM (data transfer failure).
POSSIBLE CAUSE 
  • Multiplex communication system DTC is stored (CAN line)
  • Immobilizer system programming malfunction
    • Immobilizer system-related parts have not been programmed after replacing the keyless control module.
    • Immobilizer system-related parts have not been programmed after replacing the PCM.
  • PCM malfunction
  • Keyless control module malfunction
scientia non olet · About Mike's Workshop Manuals