Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 586 (Security System And Locks System) >> Inner Handle Removal/Installation >> Front Inner Handle

Front Inner Handle

WARNING: This page is about a different car, the 2010 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION .)
  3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
  4. Disconnect the door lock switch connector.
    Fig 1: Identifying Door Lock Switch And Connector
    G06731887Courtesy of MAZDA MOTORS CORP.
  5. Disconnect each cable and remove the front inner handle.
  6. Install in the reverse order of removal.
    Fig 2: Identifying Front/Inner Handle Cable And Door Lock Cable Knob
    G06731888Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals