Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 570 (On-Board Diagnostic [Advanced Keyless Entry And Push Button Start System]) >> DTC P0830:23 [Advanced Keyless Entry And Push Button Start System] >> Notes

DTC P0830:23 [Advanced Keyless Entry And Push Button Start System]: Notes

WARNING: This page is about a different car, the 2010 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
DTC P0830:23 (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM) DETECTION CONDITION AND POSSIBLE CAUSE

DESCRIPTION Short to ground in CPP switch circuit
DETECTION CONDITION 
  • Keyless control module detects CPP switch ON signal and starter interlock switch off signal for 10 min or more  .
POSSIBLE CAUSE 
  • CPP switch connector or terminals malfunction
  • CPP switch malfunction
  • Keyless control module connector or terminals malfunction
  • Short to ground in the wiring harness between the following terminals:
    • CPP switch terminal A-Keyless control module terminal 4V
  • Keyless control module malfunction
G06731477Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals