Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 570 (On-Board Diagnostic [Advanced Keyless Entry And Push Button Start System]) >> DTC B102B:51 [Advanced Keyless Entry And Push Button Start System] >> Notes

DTC B102B:51 [Advanced Keyless Entry And Push Button Start System]: Notes

WARNING: This page is about a different car, the 2010 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
DTC B102B:51 (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM) DETECTION CONDITION AND POSSIBLE CAUSE

DESCRIPTION No programmed transmitter
DETECTION CONDITION 
  • There is no record that an transmitter was programmed (programming is never performed in past).
    NOTE:
    • If the transmitter has never been programmed, DTC B102B:51 cannot be detected even if the transmitter is cleared.
POSSIBLE CAUSE 
  • Transmitter programming error
  • Keyless control module malfunction
scientia non olet · About Mike's Workshop Manuals