Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2010 >> Tribute i Touring, FWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Liftgate Latch Removal/Installation

Liftgate Latch Removal/Installation

  1. Remove the liftgate trim panel. See LIFTGATE TRIM PANEL REMOVAL/INSTALLATION .
  2. Disconnect the liftgate latch electrical connectors.
  3. Remove and discard the 3 liftgate latch bolts.
    • To install, tighten to 12 N.m {1.2 kgf.m, 106 in.lbf}.
      Fig 1: Locating Liftgate Latch Bolts
      G05461305Courtesy of MAZDA MOTORS CORP.
  4. Remove the liftgate latch.
  5. To install, reverse the removal procedure.
    • Lubricate the liftgate latch to striker surfaces after installation.
      Fig 2: Locating Liftgate Latch
      G05461306Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals