Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2010 >> CX-9 Touring, 3.7 A, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 585 (Dynamic Stability Control System/Roll Stability Control System) >> DSC/RSC HU/Cm Removal/Installation >> DSC/RSC HU/CM Component Installation Note

DSC/RSC HU/CM Component Installation Note

WARNING: This page is about a different car, the 2009 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert the DSC/RSC HU/CM bracket tab to the vehicle frame hole as shown in the figure.
  2. Install the DSC/RSC HU/CM component.
    Fig 1: Identifying DSC/RSC HU/CM Bracket
    G04970210Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals