Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2010 >> CX-7 s Touring, 2.3 L, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Control System [L5]) >> Pcm Removal/Installation >> PCM Connector Connection Note

PCM Connector Connection Note

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • If the PCM connector is inserted at an angle and the lever is moved, the connector could be damaged. Verify that the PCM connector is inserted straight.
    Fig 1: Precaution For PCM Connector
    G06151039Courtesy of MAZDA MOTORS CORP.
  1. Verify that the PCM connector lever is tilted towards the wiring harness side as shown in the illustration.
  2. Insert the PCM connector straight until it contacts the PCM and verify that the lever reverts upward naturally.
    Fig 2: Identifying PCM Connector, Wiring Harness And Lever
    G06724796Courtesy of MAZDA MOTORS CORP.
  3. Push the lever until a click is heard.
    Fig 3: Identifying Lever Condition
    G06724797Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals