Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2010 >> 6 s Touring Plus >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System >> DSC HU/Cm Removal/Installation >> Connector Removal Note

Connector Removal Note

  1. Disconnect the connector in the order shown in the illustration.
    CAUTION:
    • If sand or other particles get into the connector, it may be difficult to remove. In order not to damage the connector, be careful not to use excessive force removing the connector.
      Fig 1: Identifying Connector Removal/Installation Order
      G06205562Courtesy of MAZDA MOTORS CORP.