Vehicle Exterior (With Advanced Keyless Entry And Push Button Start System)

1. Disconnect the negative battery cable.
2. Remove the rear finisher. (See REAR FINISHER REMOVAL/INSTALLATION .)
3. Remove the trunk lid opener switch. (See TRUNK LID OPENER SWITCH REMOVAL/INSTALLATION .)
4. Verify the continuity of trunk lid opener switch terminals A and B.
   Fig 1: Checking Trunk Lid Opener Switch Continuity

   Courtesy of MAZDA MOTORS CORP.
5. Verify that the continuity is as indicated in the table.

Fig 2: Trunk Lid Opener Switch Continuity Table

Courtesy of MAZDA MOTORS CORP.