Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2010 >> 6 s Touring Plus >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Washer System & Wiper System >> Auto Light/Wiper Control Module Removal/Installation

Auto Light/Wiper Control Module Removal/Installation

NOTE:
  • Auto wiper system are integrated with the auto light/wiper control module.
  1. Disconnect the negative battery cable.
  2. Remove the dashboard under cover (Driver side). See DASHBOARD UNDER COVER REMOVAL/INSTALLATION .
  3. Remove the auto light/wiper control module. See AUTO LIGHT-OFF CONTROL MODULE REMOVAL/INSTALLATION .
  4. Install in the reverse order of removal.
scientia non olet · About Mike's Workshop Manuals