Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2010 >> 5 Touring, 2.3 L >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Washer System & Wiper System >> Rain Sensor Initialization Setting >> Rain Sensor Reinitialization Setting >> Using M-MDS

Using M-MDS

  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
    • When using the IDS (notebook PC)
      1. Select "Electrical".
    • When using the PDS (pocket PC)
      1. Select "All Tests and Calibrations".
  3. Then, select items from the screen menu in the following order.
    1. Select "Rain Sensor Reset".
  4. Perform the initialization procedure according to the directions on the screen.
    Fig 1: Identifying DLC-2 Connector
    G05545260Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals