Neutral Switch Removal/Installation
- Disconnect the negative battery cable.
- Disconnect the neutral switch connector.
- Remove the aerodynamic under cover No. 2. (See AERODYNAMIC UNDER COVER NO. 2 REMOVAL/INSTALLATION .)
- Remove the neutral switch.
- Install the neutral switch to the transaxle case.
Tightening torque
29-52 N.m {2.9-5.3 kgf.m, 21-38 ft.lbf}
- Install the aerodynamic under cover No. 2. (See AERODYNAMIC UNDER COVER NO. 2 REMOVAL/INSTALLATION .)
- Connect the negative battery cable.