Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2009 >> RX-8 R3, 1.3 2 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Hood Latch And Release Lever Removal/Installation >> Notes

Hood Latch And Release Lever Removal/Installation: Notes

  1. To remove the hood latch, remove the seal plate. (See FRONT BUMPER REMOVAL/INSTALLATION .)
  2. Remove in the order indicated in the table.
    Fig 1: Identifying Hood Latch And Release Lever Components
    G05985963Courtesy of MAZDA MOTORS CORP.
  3. Install in the reverse order of removal.
  4. Adjust the hood. (See HOOD ADJUSTMENT .)
scientia non olet · About Mike's Workshop Manuals