Continuity Inspection

Inspect the following items:
- Power steering fluid amount (See POWER STEERING FLUID INSPECTION )
- Power steering-related inspection (See STEERING LOCATION INDEX )
Disconnect the PSP switch connector.
Start the engine.
Verify that the continuity between PSP switch terminal A and body ground is as indicated in the chart.
- If not as indicated in the chart, replace the CPP switch. (See POWER STEERING OIL PUMP DISASSEMBLY/ASSEMBLY )
- If the monitor item condition/specification (reference) is not within the specification, even though there is no malfunction, perform the "Circuit Open/Short Inspection".

Fig 1: Continuity Chart

Courtesy of MAZDA MOTORS CORP.