Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2009 >> CX-9 Touring, 3.7 A, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (MZI-3.7) >> Crankshaft Position (CKP) Sensor Removal/Installation [MZI-3.7] >> Notes

Crankshaft Position (CKP) Sensor Removal/Installation [MZI-3.7]: Notes

NOTE:
  • Disconnect the connector after the CKP sensor is removed to prevent the CKP sensor from falling off.
  • The bolt and sensor are integrated and cannot be pulled out.
  • When removing the CKP sensor, be careful not to drop the tool.
  • The bolt and sensor must be pulled in different directions. Pull them as indicated in the figure.
    Fig 1: Identifying CKP Sensor
    G05507965Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals