Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2009 >> CX-7 Touring, 2.3 L, AWD >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Steering Gear And Linkage Assembly >> Stopper Assembly Note

Stopper Assembly Note

  1. Using an appropriate pipe and a hammer, insert the rack stopper into the gear housing until the clip installation groove of the gear housing comes out.
    Fig 1: Inserting Rack Stopper Into Gear Housing
    G04860526Courtesy of MAZDA MOTORS CORP.
  2. Apply 53.3 kPa {400 mmHg, 15.8 inHg}  vacuum with a vacuum pump and verify that it is held for 30 s. 
    • If the vacuum is not held, replace the oil seal.
      Fig 2: Applying Vacuum To Stopper Assembly
      G04860527Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals